Fan Engine, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric electric motor, capacitor and quickness control switch is still installed nevertheless the cord itself is generally detached as observed in the photos. (Find “Control Notice” below for change type.)
T (See “App Notice” below for utilize in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” lengthy with a collection screw soft. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.

Control Take notice: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine just as (but you possess a rotating knob and you possess a pull-chain). If you order several engine at the same time, we can do our better to supply your purchase with each one sort of control or the additional.
Application Note: Do NOT use this electric electric motor in a nonfan app. This is a totally enclosed fan electric electric motor and made to have continuous ventilation over the motor casing for cooling. The casing isn’t vented and the electric engine will overheat and enter automated thermal electric fan motor china overload if operate in a nonfan system where there isn’t strong ventilation past the electric motor. (Caution Note: the electrical motor will restart instantly when it cools back off.) Using this electric motor for applications aside from 18 & 24″ TPI fans may possibly also overload the motor and cause it to proceed into automatic thermal overload. (Your companion blade from another producer may possess a steeper blade angle.)
Origin: This electric electric motor is produced in China.