Energy UNITS FOR DOUBLE-SCISSORS LIFT

General Description
Outfitted together with the zero leak bidirectional checking sole-noid valves, this energy unit is made for that operation of two independent circuits. Which are respectively for your key and subordinate platforms in the double scissors lift. Two cut-off valves are made use of for lowering the machine manually in case of power loss. If more independent circuits are necessary for the application please get hold of us for availability.
Remark: 1. Please check with our income engineer to the distinctive pump displacement, motor power or tank capacity.
two. CSA or UL licensed motors can be found upon request.
Special Notes
one. The AC motor is of S3 duty cycle, which could only operate intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean all the hydraulic components concerned in advance of set up of the energy unit.
3. Viscosity in the oil shoud be 15~46 cst,along with the oil ought to be clean and free of impurities,N46 hydraulic oil is suggested.
four. The energy unit should be mounted vertically.
5. Check the oil level while in the tank right after the original operating of your electrical power unit.
six. Oil altering is needed soon after the preliminary a hundred operation hrs,afterwards when each and every 3000 hours.

Tags

Recent Posts