The EP Greenhouse geared motor is a compact and lightweight reduction gearbox with a built-in limit switch system that is suitable for assembly of a locally available electric engine. The gear motor is utilized in manually-controlled or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear driver is certainly rainproof and windproof. The gearbox has a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise gear reducer for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel tranny ensures that the drive shaft is locked when the decrease gear driver is not running. The completely sealed reduction geared motor comes with an expansion chamber with a diaphragm to keep the gear essential oil at a low pressure under all conditions, even at high temperatures. Thanks to the use of an growth chamber, the gear driver could be installed in any placement. There are no limitations, since there is no need for a bleed plug. The sealed reduction gearbox keeps the apparatus essential oil of the geared motor in ideal condition for its entire operating life time. The geared motor is ideal for discontinuous use, working class s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction geared motor comes with an FT85 motor assembly flange, to which the right IEC standard motor can simply be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed in an integrated chamber and is definitely enclosed by an impact-resistant plastic material cover. The limit change system is obtainable and simple to adjust. The limit change system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear driver comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).