High-end variety of the high strength series
The DID HI-PWR-SHK roller chains have thicker link plates than HI-PWR-S roller chains, and therefore are the highest in tensile power and allowable load amid basic application chains, thus becoming suitable for lower pace hefty duty transmission.
Advisable makes use of
?The HI-PWR-SHK roller chains are 25 percent higher in tensile strength and 50 % greater in maximum allowable load than the common roller chains, but considering that their excess weight is heavier, driving effectiveness declines at higher speed. So, these are ideal for heavy duty at very low velocity applications.

Multilevel parking machines, pipe benders, building machines, and so forth.
Variety of chains
Pick a suitable HI-PWR-SHK sort chain based on “Low-speed selection”
HI-PWR-SHK series is accessible in simplex.
Sprockets
Standard sprockets for multiplex chains can’t be utilised.
Connecting links and offset backlinks
The very best function of your HI-PWR-SHK roller chains is large highest allowable load. As a result, interference-fitted connecting back links (H connecting back links) with small power degradation are used.
The connecting plate and also the connecting pins are connected with spring pins. The tensile strength of an H connecting hyperlink is equivalent to that with the chain, but the allowable load is somewhat reduce than that on the chain.
HI-PWR-S sort roller chains don’t have any offset link. Use an even variety of links.
In no way make the holes from the connecting plate larger and under no circumstances make the pins thinner to facilitate the do the job for fitting the pins to the connecting plate, considering the fact that otherwise the fatigue power might be lowered.