hydraulic planetary drive

Single and dual reduction planetary gear drives to be used with electric, hydraulic, air motors or mechanical power input from high rate, low torque sources to provide decreased speeds at increased torques. The input side has regular SAE pads for motor mounting. Available in the three result configurations shown below. Many units can be furnished with an integral parking brake.
One reduction drives are limited to 3500 RPM input; dual reduction drives to 5000 RPM. Units with essential parking input velocity is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Devices provide 95% power transmitting efficiency.

Wheel Drive
Input side has standard SAE pads and Plastic Gear Rack splined input. Output aspect has hub for installation vehicle wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature is definitely regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side options include: Keyed round, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined insight. Output side includes a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel offers extra-huge tapered roller bearings, a ductile iron hub and warmth treated ring gear to minimize backlash growth due to wear. The external bearing nut provides the ultimate in shaft retention and shaft power. Output could be a spindle shaft or different sizes of integral pinion gears.


Recent Posts