hydraulic planetary drive

Single and dual reduction planetary gear drives to be used with electric, hydraulic, atmosphere motors or mechanical power input from high speed, low torque sources to deliver reduced speeds at increased torques. The input side has standard SAE pads for engine mounting. Available in the three result configurations demonstrated below. Many units can be furnished with an integral parking brake.
Solitary reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input acceleration is limited to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Products provide 95% power transmitting efficiency.

Wheel Drive
Input side has regular SAE pads and splined insight. Output aspect has hub for installation vehicle wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined input. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined input. Output side includes a flanged spindle for coupling to the strain.

Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel offers extra-huge tapered roller bearings, a ductile iron hub and heat treated ring gear to minimize backlash growth due to wear. The external hydraulic planetary drive bearing nut supplies the greatest in shaft retention and shaft power. Output can be a spindle shaft or different sizes of essential pinion gears.


Recent Posts