Material Dealing with Energy UNIT 2
Basic Description
This power unit features power up gravity down circuit. Activate the get started solenoid to start the motor to lift the machine. The lowing movement is activated from the solenoid valve using the reducing pace managed by the strain compensated movement manage valve. Goods of this series is often widely used in the marketplace of logistic products like fork lift, mini lift table, and so on.
Unique Notes
1. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean each of the hydraulic parts concerned just before mounting the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst,which ought to also be clean and cost-free of impurities, N46 hydraulic oil is advised .
four. Oil shifting is required soon after the initial a hundred operation hrs,afterwards once each 3000 hrs.
5. The electrical power unit need to be mounted horizontally.

Material Handling Electrical power UNIT one
Basic Description
This electrical power unit is designed for the fork lift industry, consisting of hugely productive gear pump, DC motor, guide increase and decrease valve, tank, ect. The up and down movement are controlled from the lever of the manual release valve, that is outfitted with an electrical switch to activate the motor. The lowing velocity is managed by the stress compensated flow management valve.
Specific Notes
one. The duty of this power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean the many hydraulic parts concerned just before set up of the energy unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which should also be clean and totally free of impurities, N46 hydraulic oil is encouraged .
4. Oil shifting is required soon after the initial one hundred operation hrs, afterwards after every 3000 hrs.
5. The electrical power unit shown is designed to be mounted horizontally.