This electrical power unit attributes a everlasting magnet motor having a electrical power up gravity down circuit. Activate the begin solenoid to start out the motor to lift the machine. The lowing motion is activated through the solenoid valve with the decreasing speed managed by the pressure compensated flow manage valve. Merchandise of this series can be widely used in the market of logistic products this kind of as fork lift, mini lift table, etc.
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean all of the hydraulic components concerned in advance of set up of the electrical power unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which really should also be clean and no cost of impurities. N46 hydraulic oil is suggested.
four. This electrical power unit is designed to be mounted vertically.
five. Check the oil degree from the tank following the 1st star in the energy unit.
6. Oil transforming is required after the original 100 operation hours,afterwards the moment just about every 3000 hrs.
seven. More pump sizes and tank sizes are avaiable upon request.