Our direct supply chain to Martin Sprockets factories gets a wider selection of QD Bushings delivered at the proper time at the right price.
Taper bushing are widely used as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made of high quality engineered components with great tolerance. The feature is easy to use and needs no extra alteration. These bushings can fit almost all sorts of assemblies and sizes. They are the best choice in design for mechanical connections.
No costly re-boring: full selection of both metric and imperial available.
Standard range suits up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete short reach range available, for compact light-weight assemblies & Clean, Compact Style.
Simple installation and removal.
Our direct supply chain to Martin Sprockets factories gets a wider range of QD Bushings delivered at the proper time at the proper price.
Taper bushing are trusted together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made of high quality engineered materials with great tolerance. The feature is easy to use and needs no extra alteration. These bushings can fit almost all kinds of assemblies and sizes. They are the best choice in style for mechanical connections.
No costly re-boring: complete range of both metric and imperial available.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete short reach range offered, for compact light-weight assemblies & Clean, Compact Style.
Ease of installation and removal.
The initial sheave and pulley mounting system developed to facilitate installation and substitute of components.
The QD (Quick Detachable) design provides for both conventional (flange outboard) and reverse (flange inboard) mounting configurations.
1. Be sure the tapered cone areas of the bushing and the within of the driven product are clean and free from anti-seize lubricants.
2. Slide QD bushing on shaft, flange end initial. Assemble key.
3. Position QD bushing on shaft. Tighten established screw over key “hand tight” with regular Allen wrench only. Do not use qd bushing china excessive force.
4. Slide large end of sheave or sprocket taper bore into position over cone aligning drilled bolt holes in sheave or sprocket with tapped holes in flange of bushing. Assemble pull-up bolts and lock washers.
NOTE: Install M thru S bushings in the hub to ensure that the two extra holes in the hub are located as far as feasible from the bushing’s saw cut.
5. Tighten pull-up bolts alternately and evenly to tightness indicated in torque desk on back. Usually do not make use of extensions on wrench handles. There must be a gap between the face of the sheave or sprocket hub and the flange of the QD bushing to insure a reasonable cone hold and press fit.
CAUTION: THIS GAP SHOULD NOT BE CLOSED.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power tranny applications. Flanged quick-disconnect bushings include a completely split design to greatly help provide easy set up and disassembly. A tapered bushing with straight edges uses an interior screw to help drive the bushing into the shaft, while a split taper has a flange and a key on the bushing to help provide more drive.
QD bushings (inch and metric sizes) have a flanged design and show a 4° taper with conventional or reverse installation. They are stocked in popular finished bore sizes and minimum plain bore for custom reboring.
Many people make reference to both types as a “taper lock” because they both use the tapered wedging action to lock to the shaft. The taper bushing, with it’s straight sides, runs on the set screw to operate a vehicle the bushing into the bore of the component being set up (sheave, sprocket, etc.). Be careful when installing these screws. The holes with threads on the bushing are for removal just. Also remember that the appearance of a flange on the outside of the bushing doesn’t necessarily mean it’s a QD design. Split Taper bushing also has a flange, and both are not interchangeable. The QD style has a split that continues through the flange. The Steel QD (Quick Disconnect) Type bushing offers flexible and easy set up while providing exceptional holding power. QD Bushings are used thought out the industry offering comfort and design versatility. They are precision machined of quality Steel and are installed by tightening many cap screws. This draws the bushing into the taper bore of the merchandise which compresses the bore of the bushing. QD bushings are easily removed by using the cap screws as jack-screws. Dual drilled holes are furnished in QD Bushings permitting installation of product in the traditional or reverse positions. This allows cap screws to be installed through item hub or bushing flange whichever is most convenient. A significant benefit in set up, cap screws are usually inserted from the outside where they are often accessible. QD Bushings can be found from share with all well-known bores within the number of every size bushing.
QD Bushings feature a split tapered flange with the split central to the flange and taper. They are used on sprockets, sheaves, and pulleys where more clamping push is required over standard bored-to-size bushings. Quick-Disconnect Bushings are essential for mounting v-belt drives, synchronous belt drives and roller chain drives.