Common Description
Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is designed to operate materials handling equipment. The decreasing movement is achived by the solenoid valve together with the decreasing velocity managed by an adjustable needle valve. The left and correct functions are equipped by using a dual pilot operated verify valve and cross-over relief valves.
Remark: Please seek advice from our sales engineer to the distinctive pump displacement, motor power or tank capability.
Distinctive Notes
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean all of the hydraulic elements concerned just before installation of the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which must also be clean and cost-free of impurities.N46 hydraulic oil is encouraged.
4. This electrical power unit needs to be mounted horizontal.
five. Check the oil level inside the tank immediately after the 1st start out from the power unit.
6. Oil altering is required after the original 100 operation hrs, afterwards once just about every 3000 hours.