Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that is built for strength and strength. U1 bushings are being used in an extensively broad range of applications, which includes; sprockets, shaves, pulleys, gears, and much more, we as well offer all of these products. What sets this bushing apart is the high-quality steel structure along with precise manufacturing and top quality control; this ensures that you always get a premium quality consistent product. What really units us apart from the other guys is our highly trained expert workers and our company-wide goal of customer satisfaction.
1. Be sure the tapered cone floors of the bushing and the within of the driven product will be clean and free from anti-seize lubricants.
2. Place the bushing in sprocket or other portion type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing remains loose to make sure sliding in shape on shaft.
4. With crucial on shaft, slide the sprocket or other part type to the desired position on the shaft. Make sure to leave the heads of the cap screws attainable.
5. Align the sprocket or part type, tighten the screws additionally and progressively until they happen to be pulled up tight. Usually do not apply extensions on the wrench handles and do not allow the sprocket or portion to end up being drawn i connection with flange of bushing. At this point there should be a gap between your bushing flange and sprocket, make certain this gap does not close.
Dual split barrel ensures concentricity
Grips the shaft with confident clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or tied to mounting screws
External key of all sizes for positive drive and higher torque carrying capabilities
Double-split barrel for great clamping
Solid flange to keep up concentric bores
Available in “, metric, and spline bores. Bore range from 3/8″ to 10”
Solid Flange & Double Split Barrel – Assures better concentricity to the shaft.
Key to Key Drive – With keys in both the shaft and product to provide the strongest possible drive.
3/4″ per Foot Taper on Barrel – Personal locking taper provides the highest amount of mechanical locking product to product.

Taper bushing are widely used together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are constructed of high quality engineered resources with superb tolerance. The characteristic is easy to use and needs no further alteration. These bushings can suit almost all types of assemblies and sizes. They are the best choice in design for mechanical connections.
To complete designations put bore size. For example: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No costly re-boring: complete range of both metric and imperial obtainable.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete short reach range available, for compact light assemblies & Clean, Compact Style.
Ease of installation and removal.
This Split Taper Bushing is designed exclusively for use with cast iron bushed bore pulleys and will be purchased on a single page as the Split Taper Bushing china pulley you need.
For use with 1 3/16” shaft sizes.
Includes 2 set screws.